Citizen CL-E700 Series User Manual page 46

Chapter 2 Printer Operation
Mode Settings
[Datamax® Emulation]
Top Menu Sub Menu
Test Mode Print Pattern
Head Check
Factory Default
Hex Dump
Serial Monitor
Auto Calibration
[Auto Cal]
Sensor Monitor
Global –
configuration
[Global Config]
Note: To restore factory default settings, turn on printer power while pushing the Feed and Pause keys simultaneously, then press
the MENU key and the Stop key sequentially.
Default Menu
Current Config Current Config
Global Config
Sample
No Yes
No
No Yes
No
No Yes
No
– –
See Through See Through
Reflect
See Through See Through
Reflect
Config Set 1 Config Set 1
Config Set 2
Config Set 3
46
Remarks
Executes the test pattern.
Executes head check.
Initializes the set values of the configuration
set to the state when the unit was shipped
from the factory.
Sets the hex dump mode.
Displays the state of the serial interface.
Executes the calibration of the sensor.
Displays the level of the sensor.
Sets the Config Set.