Chapter 2 Printer Operation
Setting the Media
Media Thickness Adjustment
(p.59)
Media Width Adjustment
(p.60)
7. Lift the sensor arm up temporarily and adjust the media
guide. Align the media with the left fixed media guide, align
the right movable media guide with the media width, and
lower the sensor arm.
Fixed media guide
8. Push the head close knob to lower and lock the head unit.
Be sure to always push the head close knob to lock the head
unit. Align it with the width of the media that has been set,
then set the media width and media thickness adjustment
dials. See "Chapter 3 Printer Adjustments".
Head unit
9. With the power switched on, push the Feed key to feed the
media.
It will halt at the next print start position.
29
Sensor arm
Media width adjustment
Movable media
guide
Head close knob
Media thickness
adjustment