Ribbon Guide Adjustment - Citizen CL-E700 Series User Manual

Chapter 3 Printer Adjustments
Adjusting the Ribbon

Ribbon guide adjustment

Prevent occurrence of wrinkles on the ribbon by adjusting the inclination
of ribbon guide at the rear side (feeding side).
If looses occur in the feeding side ribbon, adjust by using the following
procedure. Align the position of the scale to the center.
1. Loosen the ribbon guide fixing screws (2 places).
2. Loosen the screw on the ribbon guide adjusting cam.
3. Change the inclination of the ribbon guide by sliding the
ribbon guide adjustment cam.
 When ribbon loosing occurs on the side opposite to the front
ribbon left-right balance adjustment knob side
Raise the ribbon guide adjustment cam and increase the inclination
of the ribbon guide shaft of the side where there is no loose in the
ribbon (adjustment knob side).
Ribbon guide adjustment cam
65
Ribbon guide
Ribbon guide
xing screw
xing screw
Ribbon guide adjustment cam