Citizen CL-E700 Series User Manual page 19

Chapter 1 Setup
Part Names and Functions
Power ON/OFF (p.22)
Connection to Power (p.20)
Replacing the Interface Board
(p.88)
USB Interface (p.75)
Ethernet Interface (p.76)
Rear View
1
2
1 Power switch
The is the power switch for the printer.
2 Power cord inlet
The connector of the enclosed power cord is connected here.
3 Fanfold paper insertion slot
If you want to use fanfold paper, insert the media into this slot from
outside the printer.
4 Option interface
Optional interface board can be installed by removing the interface
cover. Contact your retailer if you want to use the option interface.
5 USB interface (USB2.0)
This receives USB transmission of data from a host computer.
6 Ethernet interface
Data from host computer is received via wired LAN communication.
NOTE: Do not connect the USB cable to the wired LAN connector.
Doing so may damage the connector.
19
3
4
5
6