Setting The Media (Ribbon, Paper) - Citizen CZ-01 User Manual

Setting the media (ribbon, paper)

1
Pull the opening lever toward you to open the printer unit's top door.
Remove the ribbon.
Opening lever
Caution
• When the top door is opened, take care
that a hand does not get caught in the
gap between the back of the top door and
the printer (see the figure on the right).
Otherwise, you may get injured.
• The thermal head will be hot for some time
after printing. Do not touch the thermal head
as there is a danger of burns.
• When setting or removing the ribbon, be
careful not to let the thermal print head
come into contact with your wristwatch,
accessories, etc. This may damage the
thermal print head.
2
Set the new ribbon.
Caution
• When setting the media, make sure to use the plastic bag or sheet covering the
media. Never put it directly on the table, floor or work spaces.
Top door
15
Top door
Take-up side
Supply side
Rotate in the direction of the arrow
to take up the slack.
Printer Installation
Ribbon