Citizen CL-E700 Series User Manual page 45

Chapter 2 Printer Operation
Mode Settings
[Datamax® Emulation]
Top Menu Sub Menu
Network Address ** –
Subnet Mask **
Gateway Address ** –
BOOTP **
DHCP **
WLAN Mode ***
WLAN Channel ***
WLAN SSID ***
Machine Model Number
Information
Boot Version
[Machine Info]
ROM Version
ROM Date
ROM CheckSum
FPGA Version
Head Check
Print Counter
Service Counter
Cut Counter
Sensor Monitor
Option Interface
[Option I/F]
RS-232C Baud
RS-232C Parity
RS-232C Length
RS-232C Stop bit
RS-232C X-ON
MAC Address
** If the multi-function LAN board is mounted, or during web monitor function.
***When the multi-function wireless LAN board is available and when Web monitor is operating.
Note: Settings related to interface are enabled after restart or after power is connected again.
Default Menu
000.000.000.000 to
255.255.255.255
– 000.000.000.000 to
255.255.255.255
000.000.000.000 to
255.255.255.255
– On
Off
– On
Off
– Auto
Ad-Hoc
Infrastructure
– 01 to 14
– Max. 32 characters
– CL-E***
– *.*
– ********
– **/**/**
– ****
– *.*
– OK
NG
– ****.*** km
– ****.*** km
– *******
– *.* V
– None
RS-232C
LAN
IEEE1284
– –
– –
– –
– –
– –
– –
45
Remarks
Setting fixed IP address of the LAN board.
Setting fixed subnet mask value of the LAN
board.
Setting fixed default gateway address of
the LAN board.
Setting the BOOTP of the LAN board.
Setting the DHCP of the LAN board.
Wireless LAN mode setting.
Wireless LAN channel setting.
SSID setting of Wireless LAN.
Displays the model name.
Displays the boot version
Displays the ROM version.
Displays the date the ROM was prepared.
Displays the check sum of the ROM
Displays the FPGA version
Displays the results of the head check.
Displays the print counter.
Displays the service counter.
Displays the cut count.
Displays the sensor level.
Displays the presence/absence of the
optional interface.
• If Dip Switch 1 is ON in RS-232C interface,
RS-232C (DIP SW) will be displayed. (See
"Interface" in the section of Appendix)
If Dip Switch 1 is ON in RS-232C interface,
the communication condition set in Dip
Switch will be displayed.
Displays MAC Address