Setting A Do Not Disturb Condition; At Your Station - Comdial DXP Impact Reference Manual

GCA70–249
7.11 Setting A Do Not Disturb
Condition At Your Station
This feature keeps calls from ringing at your speakerphone, and makes
your station appear busy to intercom calls. If your installer has
programmed your station to have this feature, you can enable it as
needed.
Generally, callers cannot override this feature. They hear two quick tone
bursts every two seconds when they call a telephone that is set to the do
not disturb mode. However, the installer may program some telephones
with the ability to override a do not disturb condition at another
telephone.
You can program a permanent do not disturb button to provide yourself
with quick access to this feature if you wish. See the programming
section of this user's guide for details.
• To enable DND, proceed as follows:
1. Press preprogrammed DND button. The light next to the DND
button turns on when the feature is active,
—OR—
press INTERCOM and dial # 01.
• To override a do not disturb condition at another telephone,
1. Make intercom call and hear DND tone.
2. Dial 03 (called party will hear several short tone bursts).
3. Wait for reply.
• To disable DND,
1. Press preprogrammed DND button. The light associated with the
DND button turns off when the feature is disabled,
—OR—
press INTERCOM and dial # 01.
Using The Other Telephone Features
Non-LCD Reference Manual 7 – 9