Table of Contents
Advertisement
Sending And Receiving Non-Verbal Messages
• To turn on the message-waiting light (and a broken dial tone) at
an idle telephone,
1. Press INTERCOM.
2. Dial
3.
3. Dial extension number of station to be alerted. The
message-waiting light of called station will flash.
• To turn off the message waiting light at a busy or idle station,
1. Press INTERCOM.
2. Dial
#
3.
3. Dial extension number of station that was alerted. The
message-waiting light of called station will turn off.
• To turn off the message-waiting light during message-delivering
conversation,
1. Press INTERCOM once if off-hook, twice if on-hook.
• To receive a message at an alerted station,
1. Observe flashing message-waiting light or hear the broken dial
tone.
2. Press INTERCOM, then press HOLD. The station that left
message is called automatically.
NOTE: Only the person who sent the message and the person
receiving the message can turn the indicator off.
8 – 2 Non-LCD Reference Manual
GCA70–249
Advertisement
Table of Contents
