Table of Contents
Advertisement
GCA70–249
(The following instructions assume a tone-first default setting. Any user
can change a call to voice announce signaling by pressing the
INTERCOM button again after dialing the extension number or by
pressing the DSS button again.)
• To manually cause the other telephone to ring,
1. Lift handset or press INTERCOM.
2. Dial extension number (called telephone will ring).
• To tone call automatically,
1. Press DSS button (called telephone will ring).
(The following instructions assume a voice-first default setting. Any user
can change a call to tone signaling by pressing the INTERCOM button
again after dialing the extension number or by pressing the DSS button
again.)
• To voice announce manually,
1. Lift handset or press INTERCOM.
2. Dial extension number.
3. Speak your announcement.
• To voice announce automatically,
1. Lift handset and press DSS button.
2. Speak your announcement.
Some systems will be arranged so that certain stations have a hot line
feature. If your station is so arranged, every time you lift the handset,
your speakerphone will automatically ring a preselected station
(programmed by the installer). To make an intercom call to a station
other than this hot line station, or to make a call on an outside line, you
must press an intercom or line button before you lift the handset; then
you can dial the number.
Non-LCD Reference Manual 3 – 7
Making Calls
Advertisement
Table of Contents
