Do Not Disturb Condition - Comdial DSU II User Manual

GCA70-281

Do Not Disturb Condition

This feature keeps calls from ringing at your LCD speakerphone and makes your
station appear to be busy to intercom calls. As a reminder, a station that is set in Do
Not Disturb mode will display this information on the LCD.
To enable DND, proceed as follows:
1. SELECT OPTIONS .
2. SELECT NEXT until the DND option appears.
3. SELECT DND .
4. SELECT ON .
5. SELECT PREV .
6. PRESS SPEAKER to end.
To disable the DND condition,
1. REPEAT the above procedure, BUT SELECT OFF instead of ON
at step 4.
Although it does not appear on your screen while Do Not Disturb is
NOTE:
displayed, the right interactive button will activate the Options menu.
To set a Do Not Disturb condition at your
telephone when a call rings at your station,
1. Hear ringing and notice incoming call informa-
tion in display.
2. PRESS programmed DO NOT DISTURB
button. (See Feature Buttons section on page 48
for programming instructions.)
LCD Speakerphone Station User's Guide
Other Features
Do Not Disturb
ON OFF< PREV
Setting Do Not Disturb
24 12:35
MON
Do Not Disturb
Station With DND Set
69