Table of Contents
Advertisement
GCA70–249
• To set up a conference call on an E & M tie line,
1. Make first call.
2. Press TRANSFER/CONFERENCE; call is placed on hold
automatically.
3. Select next line and make next call.
4. Press TRANSFER/CONFERENCE to establish conference.
5. Repeat the last three procedures to add more parties for up to a
7-party conference (including yourself).
• To continue conversation on remaining line after other outside
lines have dropped out of conference,
1. Press the line button of the remaining party.
• To retrieve a line from hold and bring that party back into the
conference,
1. Press TRANSFER/CONFERENCE.
2. Press line button.
3. Press TRANSFER/CONFERENCE.
NOTE: If all the conference circuits are busy, you will not be able to
add a party to the conference.
• To drop out of a conference call between you and two outside
lines (creating an unsupervised conference),
1. Hang up (lines remain lighted and in use until one or both outside
parties disconnect).
• To rejoin an unsupervised conference between two outside lines,
1. Press TAP.
NOTE: Conference volume levels depend upon the quality of the
external lines.
Using The Other Telephone Features
Non-LCD Reference Manual 7 – 21
Advertisement
Table of Contents
