GCA70–249
4.2
Handling Hold Recalls
After a call has been on hold for a period of time (set by the installer of
your system), the system will cause a hold recall tone burst to sound at
your telephone and the flash rate of the line button to become faster.
If the call is on exclusive hold, it will revert to manual hold after the hold
recall period (you will hear four short tone bursts at 12-second intervals).
Calls that revert to manual hold can be picked up from any telephone
with line appearance for the recalling line or by using a "directed" or
"group" PICK UP button.
• If a held line is recalling,
1. Answer/retrieve recall.
2. Press HOLD to place the call on hold at your station and
restart HOLD timer,
—OR—
press the line button or TAP to retrieve the call.
Placing Calls On Hold
Non-LCD Reference Manual 4 – 3