Table of Contents
Advertisement
Using The Other Telephone Features
• To use Tracker to transfer a call to a park orbit for retrieval and
transmit the call's park orbit code and caller ID information (if
available),
1. Answer call and press TRANSFER/CONFERENCE.
2. Dial extension number.
3. If the called station does not answer or is busy, press
(INTERCOM, and dial
4. Hear confirmation beep (Tracker page accepted) or hear busy tone
(Tracker page not accepted).
5. Press SPEAKER button to end.
NOTE: Tracker parked calls will recall to your station after a
pre-programmed time-out. You can either replace the call into
another Tracker page orbit or retrieve the call for servicing.
• To retrieve a call that you parked using the Tracker option,
1. Press TAP.
• If you receive a parked call message on your Tracker pager,
1. Go to any system station.
2. Press INTERCOM.
3. Dial Tracker pager displayed orbit code (#800–#899).
4. Retrieve call.
• To enable or disable a Tracker pager at your station,
1. Press INTERCOM.
2. Dial code # 07 to enable pager, or # 06 to disable pager.
3. Enter extension number.
7 – 18 Non-LCD Reference Manual
8).
GCA70–249
Advertisement
Table of Contents
