Table of Contents
Advertisement
Dial Rule Menu
Calling Within My Home
Area Code
Installation Manual
August, 2011
•
Home Area Code – Set this to the Area code where the phone is
located. This will be used by Call Manager to determine which dialed
calls are within your home area code and when searching a contact
manager (reverse screen-pop) the dialed number will need the area
code included, i.e. Microsoft Outlook.
•
All calls in my Area Code – Select All Calls in my Area Code if all calls
with the same area code can be considered as local calls.
•
Calls to Selected Office Codes – Select Calls to Selected Office
Codes when only certain office codes in the same area code are
considered to be local calls. If this option is selected, the following
office code entry screen is displayed.
•
To Add Local Prefix Codes – Enter the prefix code and click
Include. The wild card character # can be entered at the end
of a prefix code entry to represent a range of codes. For
example, 75# would represent all codes 750 to 759; and 7##
would represent codes 700 to 799. If certain numbers need to
be excluded from the wild card range, specify the number
and click Exclude.
•
To Delete Local Prefix Codes – Highlight a prefix entry and
click Delete. The delete button removes the entire entry from
the list, therefore if the entry has a wild card, then it removes
all codes represented by the wild card.
•
Dial Area Code on Local Calls – Enable this feature in areas such as
Atlanta, where full 10 digit number must always be used (include the
area code) even when the call is local. Most areas of the US, local
calls do not include the area code and dial only 7 digit numbers for
local calls. Any number dialed from another program or hot key
dialing will be down to its base 7 digits by removing the Home Area
Code before it is dialed.
Calling Within My Home Area Code
14-17
Hide quick links:
Advertisement
Table of Contents
