EP SERVER CHASSIS INSTALLATION
Horizontal Mount
Vertical MOunt
Rack Mount
Left Bracket - with PS Shelf and Cable Ties
Figure 2-14 IPedge EP Rackmount Brackets
Installation Manual
August, 2011
Attach the rubber pads to the bottom of the chassis. Four pads are
included with the server chassis.
Attach the vertical mount base (two pieces) to the left side of the chassis,
as viewed from the front.
CAUTION! Do not mount the IPedge EP chassis to the wall.
Attach the optional rackmount brackets (P/N: I-EP-RL2-1A) to mount the
IPedge EP server in a standard EIA Universal Spacing 19 inch equipment
rack.
Note:
Do not attach the rubber base pads to the chassis when the
server is going into an equipment rack.
1. Attach the right bracket with the two screws provided.
Horizontal Mount
Right Bracket
2-15