Audiocodes Mp118 Fxo; Set Ip Address - Toshiba IP edge EP Installation Manual

AUDIOCODES MP118 FXO

AUDIOCODES MP118 FXO

SET IP ADDRESS

12-2
This section is for setting up an AudioCodes MP118 as an FXO gateway.
To setup FXS operation refer to
Chapter 12 –-10
This is for MP118 release 5.8 or later.
The AudioCodes MP118 defaults:
• IP address: 10.1.10.10
• Username: Admin
• Password: Admin
Power up the MP118 and connect the NIC to a hub, switch or network.
1. Using a PC connected to the hub, switch or network launch a internet
browser such as Windows Explorer.
2. Enter the IP address of the MP118
3. Login to the MP118.
4. Select CONFIGURE > NETWORK SETTINGS > IP SETTINGS.
Set IP Address, Subnet Mask, and Default Gateway Address
"AUDIOCODES MP118 FXS" on page
Installation Manual August, 2011