Ipedge Configuration - Toshiba IP edge EP Installation Manual

IPedge CONFIGURATION

IPedge CONFIGURATION
Set Up Trunk ILG
Set Up Trunk OLG
Set SIP Trunking
12-8
The next steps program the IPedge SIP trunk group to route the calls
received through the gateway. Login to Enterprise Manager for the
following.
1. Select Trunk > Trunk Groups then, click on the New icon.
2. In the Group Direction dialog box select Incoming and Outgoing then,
click on OK.
3. In the Common tab select the Group Number for this trunk group.
4. Set the Line Type to CO
Set Group Type to SIP
Set Private Service Type to Standard
Set GCO Key Number to 0
Set Pool Key Number to 0
5. In the Incoming tab:
Set the CO Service type to DID
Set the DID Digits parameter to 4. (Or as appropriate for your
system. Not more than 7.)
6. Click on the Save icon.
1. Select Trunk Groups. Click on the Outgoing trunk group created in
the steps above then, click on the Edit icon.
2. Set the Group Type to SIP
Set Trunk Type to CO/DID
3. Assign a MOH source if you want something other than the default.
4. Click on the Save icon.
1. Select Trunk > SIP Trunking. In the Channel Group tab select the
SIP Trunk Channel Group number created above.
Note: In the Channel Group tab the SIP Trunk Channels field is set to
the total number of SIP trunk channels used in the system or, the
number of channels that will be used. Do not exceed the number
of SIP channel licenses.
2. In the SIP Trunk Channels box select the total number of SIP trunk
channels used in the system. Do not exceed the number of licenses
on the server.
3. The Service Definition tab is where the ILG/OLG are assigned and
the SIP trunk provider is defined.
Set the ILG and OLG to the group number created above.
Set the Registration Mode to None
Set the Effective Channel Number to the number SIP trunk
channels to reserve for this group. This must be equal to or less than
the number of SIP Trunk Channels.
Set the Domain Name to the IP address of the AudioCodes gateway
Leave the SIP Server field blank
4. Click on the Save icon.
Endpoint Numbers
Installation Manual August, 2011