Server Based Call Manager Upgrade; Installation - Toshiba IP edge EP Installation Manual

Server Based Call Manager Upgrade

Server Based Call
Manager Upgrade

Installation

14-26
When the new Call Manager is released, it is possible to install the
upgrade on the server so that it can be downloaded to the client. If the
server based upgrade is configured, the Call Manager user will be
prompted to upgrade the software when the Call Manager is launched.
The steps below show how to install the Call Manager upgrade to the
server and how to configure the Net Server to upgrade the Call Manager
client.
Note: Server based update is available for clients licensed for Call
Manager Advanced. Server based update is not available for Call
Manager Standard clients
The Call Manager upgrade software is provided as an rpm file from
Toshiba FYI, and it needs to be stored in the PC that can connect to
IPedge through Webmin from Enterprise Manager.
From the PC, launch Enterprise Manager and run Webmin. In the
Webmin, select Software Packages menu under System menu. Then,
select From uploaded file, and click Browse to specify the Call Manager
upgrade software file. Then click Install.
Installation Manual August, 2011
Installation