Toshiba IP edge EP Installation Manual page 133

IPedge CONFIGURATION
DID Intercepts
Installation Manual August, 2011
5. Select Trunk > SIP Trunking then, click on the Service
Assignments tab. Set:
SIP Channel Group = the TGN of the SIP Trunk Group (should
already be set).
Service Definition Index = 1 for the first SIP trunk group, each for
additional SIP Trunk group increment the Index number (2, 3, etc.)
6. In the Service URI tab click on the New icon. Set a SIP URI for each
destination number assigned in the MP118 gateway Auto Dial
number program.
Service Definition Index = Same as Step 5 above
SIP URI User Name and SIP URI Password = blank
SIP URI Number = The dialed number of the trunk
SIP URI Attribution = MAIN
7. Click on OK.
8. Click on the Save icon.
For detailed SIP trunk configuration information refer to
Trunk Configuration.
DID The IPedge system treats all incoming SIP trunk calls as DID.
1. Select Trunk > DID. Click on the New icon.
2. Set:
ILG Group Number = The trunk group number of the SIP trunks
DID Number = The last 4 ~ 7 digits of the dialed digits (Set in the
trunk group asdsignments above.)
MOH Source = The MOH for this trunk group
Audio Day1 Dst Type = Dialing Digits
Audio Day1 Dst Digits = The station DN to which the call will ring
3. Set Day2 and Night as appropriate
4. Set the DID/DNIS Name to what will display on the station when a call
is received
5. Set the DID/DNIS No. VMID for calls that should ring to the Auto
Attendant or directly to voice mail.
6. Click on the Save icon.
7. Select Trunk > DID Intercept
Set the Audio Day __ Dest to Dialing Digits
Set the Audio Day __ DN to the intercept directory number
8. Click on the Save icon.
Endpoint Numbers
Chapter –SIP
12-9