Suzuki GSX1300R Manual page 651

Cowling Brace
Removal
1) Remove the body cowling.
2) Remove the intake pipes.
3) Remove the combination meter (1).
1
1
4) Remove the wire clamps (2).
5) Remove the steering damper mounting bolt (3).
3
I823H1940032-01
I823H1940033-01
2
I823H1940034-01
I823H1940035-01
6) Remove the cowling brace (4).
Installation
Install the cowling brace in the reverse order of removal.
Pay attention to the following points:
• Tighten the cowling brace mounting bolts to the
specified torque.
Tightening torque
Cowling brace mounting bolt (a): 32 N·m (3.2 kgf-
m, 23.0 lb-ft)
(a)
• Before installing the steering damper mounting bolt,
apply grease to the steering damper bearing and dust
seals.
: Grease 99000–25010 (SUZUKI SUPER
GREASE A or equivalent)
Exterior Parts: 9D-19
4
I823H1940036-01
I823H1940037-01
I823H1940038-01