Suzuki GSX1300R Manual page 43

Suzuki gsx1300r motorcycle
Hide thumbs Also See for GSX1300R:
Table of Contents

Advertisement

Evaporative Emission Control System
Inspection (E-33 only)
Inspect evaporative emission control system
Every 12 000 km (7 500 miles, 24 months)
Inspect the evaporative emission control system
periodically (E-33 only).
PAIR System Inspection
Inspect PAIR system
Every 12 000 km (7 500 miles, 24 months)
Inspect the PAIR (air supply) system periodically. Refer
to "PAIR System Inspection in Section 1B (Page 1B-11)".
Cooling System Inspection
Inspect cooling system
Every 6 000 km (4 000 miles, 6 months)
Replace engine coolant
Every 2 years
Engine Coolant Level Inspection
1) Hold the motorcycle vertically.
2) Check the engine coolant level by observing the "F"
and "L" lines on the engine coolant reservoir tank. If
the level is below the "L" line, add engine coolant to
the "F" line from the engine coolant reservoir tank
filler (1) behind the right side cowling. Refer to
"Exterior Parts Removal and Installation in Section
9D (Page 9D-14)".
B815H20206011
B815H20206012
B815H20206013
I815H1020028-01
1
I815H1020029-01
Maintenance and Lubrication:
Engine Coolant Change
Refer to "Engine Coolant Description in Section 1F
(Page 1F-1)".
WARNING
!
Do not open the radiator cap when the engine
is hot, as you may be injured by escaping hot
liquid or vapor. Engine coolant may be
harmful if swallowed or if it comes in contact
with skin or eyes. If engine coolant gets into
the eyes or in contact with the skin, flush
thoroughly with plenty of water. If swallowed,
induce vomiting and call physician
immediately.
1) Remove the side cowling. Refer to "Cooling Circuit
Inspection in Section 1F (Page 1F-4)".
2) Remove the radiator cap (1).
3) Drain engine coolant by disconnecting the water
pump inlet hose (2).
4) Flush the radiator with fresh water if necessary.
5) Reconnect the water pump inlet hose.
6) Pour the specified engine coolant up to the radiator
inlet.
Engine coolant capacity (excluding reservoir)
2 700 ml (2.9/2.4 US/lmp qt)
7) Bleed air from the cooling circuit.
8) After changing engine coolant, reinstall the removed
parts.
0B-13
1
I815H1020030-01
2
I815H1020031-01

Advertisement

Table of Contents
loading

Table of Contents