Suzuki GSX1300R Manual page 307

• Install the washer (1) and pin (2).
NOTE
Be careful not to drop the washer or pin into
the crankcase.
2
• Install the oil pump driven gear (3).
• Install the snap ring (4).
Special tool
: 09900–06107 (Snap ring pliers)
4
Clutch
• Remove the clutch component parts (1). Refer to
"Clutch Removal in Section 5C (Page 5C-14)".
1
I823H1140258-01
3
I823H1140259-01
1
I823H1140260-01
Starter Torque Limiter
• Install the starter idle gear and starter torque limiter.
Refer to "Starter Torque Limiter / Starter Clutch
Removal and Installation in Section 1I (Page 1I-10)".
Starter Motor
• Install the starter motor (1). Refer to "Starter Motor
Removal and Installation in Section 1I (Page 1I-4)".
Engine Mechanical: 1D-86
I823H1140261-01
1
I815H1140117-01