Suzuki GSX1300R Manual page 455

– Hold the swingarm pivot shaft and tighten the
swingarm pivot nut (2) to the specified torque.
Tightening torque
Swingarm pivot nut (b): 100 N·m (10.0 kgf-m,
72.5 lb-ft)
2
(b)
– Tighten the swingarm pivot lock-nut (3) to the
specified torque with the special tool.
Special tool
(B): 09940–14970 (Swingarm pivot thrust
adjuster socket wrench)
Tightening torque
Swingarm pivot lock-nut (c): 90 N·m (9.0 kgf-
m, 65.0 lb-ft)
3
(c)
(A)
I815H1230033-01
(B)
I815H1230034-01
– Tighten the cushion lever, cushion rod and rear
shock absorber mounting nut to the specified
torque.
Tightening torque
Rear shock absorber mounting nut (d): 50 N·m
(5.0 kgf-m, 36.0 lb-ft)
Cushion rod mounting nut (e): 78 N·m (7.8 kgf-
m, 56.5 lb-ft)
Cushion lever mounting nut (f): 78 N·m (7.8
kgf-m, 56.5 lb-ft)
NOTE
Install the washers between cushion lever
and frame.
(d)
(d)
(e)
Rear Suspension: 2C-10
I815H1230035-01
(e)
(f)
I815H1230036-02