Suzuki GSX1300R Manual page 297

• Match the upper and lower crankcases.
NOTE
Align the gearshift forks with each gearshift
groove.
• Tighten the crankshaft journal bolts (M9) in ascending
order of numbers assigned to these bolts. Tighten
each bolt a little at a time to equalize the pressure in
the following two steps.
CAUTION
!
Fit the new copper washers to the bolts ("7",
"8", "9" and "10") to prevent oil leakage.
Tightening torque
Crankshaft journal bolt (M9) (Initial): 18 N·m (1.8
kgf-m, 13.0 lb-ft)
Crankshaft journal bolt (M9) (Final): 32 N·m (3.2
kgf-m, 23.0 lb-ft)
10 6
9 5
I823H1140216-01
2 4 8
1 3 7
I823H1140309-02
• Tighten the other crankcase bolts a little at a time to
equalize the pressure.
CAUTION
!
Fit the new copper washers to the bolts "B".
Tightening torque
Crankcase bolt (M6): 11 N·m (1.1 kgf-m, 8.0 lb-ft)
Crankcase bolt (M8): 26 N·m (2.6 kgf-m, 19.0 lb-ft)
Crankcase bolt (M10): 50 N·m (5.0 kgf-m, 36.0 lb-
ft)
"B"
• After the crankshaft journal bolts and crankcase bolts
have been tightened, check that the crankshaft
rotates smoothly.
Engine Mechanical: 1D-76
I823H1140218-03
"B"
I823H1140219-04