Setting Up The Power Paper Stacker - IBM 6400 Setup Manual

Setting Up the Power Paper Stacker

1. Turn the printer on.
Figure 2–44. Rear Operator Panel
2. Using the rear operator panel, press ONLINE to take the printer offline.
Press STACKER UP button and wait for the stacker to reach the top of
its travel.
3. Make sure the wire paper tent, if provided, is in the base of the stacker
with the alignment rods against the paper stacker rails.
Wire Paper
Tent (Optional)
Alignment Rod (2)
Chapter 2. Setting Up the Printer
Paper Advance
Stacker Up
Stacker Down
Rails
2–49