Printer Control Menu - IBM 6400 Setup Manual

Printer Control Menu

PRINTER
CONTROL
(From page 4–9)
Interface Display
Selection Language
(1)
Twinax
(1)
Coax
(4)
Ethernet
Parallel*
Serial
Auto Switching
Paper Jam
Detection
Enable*
Disable
OCR Font
Density
120 Dots Per Inch*
180 Dots Per Inch
Note:
(1)
The Twinax and Coax interface menus only appear in the
menus if the IBM Coax/Twinax feature is installed. If the
Multi–Platform Interface Coax/Twinax feature is installed the
Twinax and Coax Interface menus are not displayed because the
feature does not use these menus.
(2)
Top exit tear path can only be selected on pedestal models.
(3)
If the Power Paper Stacker is installed.
(4)
Either the Ethernet Interface menu or the Parallel Interface menu
will be displayed. They can not both be displayed at the same time.
4–10 6400 Line Matrix Printers Setup Guide, Cabinet and Pedestal Models
Alarm
Control
English* Alarm Enabled*
German Alarm Disabled
French
Italian
Spanish
Dutch
Portuguese
Forms Set Platen at
Speed Bottom of Form
Normal Speed* Disable*
Slow Speed Open
Eject/Restore PTR Setup
Option
Standard* Setup Parse
(2)
Top Exit Tear Disable*
Enable
Setup SFCC
1 – FF
21h*
Figure 4–2. Printer Control Menu
Print Hex Print
Direction Mode
Bidirectional* Disable*
Unidirectional Enable
Shuttle
Timeout
1–60 Seconds
5 Seconds*
File System
Overwrite
Enable*
Disable
View File List
Version ....
Delete Files
Version ....
Optimize & Reboot
Print File List
To view options, press:
Scroll Scroll
To select an option, press:
To exit the configuration menus
To exit the configuration menus
and return to READY, press:
*
= Factory Default
Power On
State
Ready*
Not Ready
Energy
Saver Timer
Instant
5 – 30 Seconds
1 – 60 Minutes
15 Minutes*
Power
(3)
Stacker
Enable*
Disable
Enter Return
Enter
Start