6400-Lu1-Scs-Remote Sna 3174 Control Unit - IBM 6400 Setup Manual

Step 2 – JES2 Definition (SYS1.PARMLIB)
RMT1
LUTYPE1,BUFSIZE=3840,LINE=1,NUMRD=0,NUMPR=1,NOCOMP,NOCM
PCT,
R1.PR1
CLASS=A,NOSEP,PRWIDTH=132,NOFCBLOD,WS=(W,R,Q,PMD,LIM,F,
T/C,P),
DESTID NAME=LOC6400,DEST=R1
Step 3 – Define to CICS or another application program
An application program must provide the SCS commands to control the
printer. CICS, VPS, and other applications support SCS as well as numerous
application programs, both customer written and vendor supplied. Refer to
the vendor documentation for defining an SCS printer to the program for its
use. If there is no specific information on the 6400 you may use the IBM
4234 for reference.
Step 4 – Printer Settings
It is recommended that the following printer settings be changed from
factory default settings:
Printer Control => Interface Selection => Coax
Coax Interface => Format Control => Enable
6400–LU1–SCS–Remote SNA 3174 Control Unit
LU1–SCS mode is utilized when neither IPDS nor PSF is needed to
accomplish the print function desired. An existing remote 3174
SNA–connected control unit is assumed. The steps required to install a
remote LU1–SCS printer for host definitions are as follows:
D–8 6400 Line Matrix Printers Setup Guide, Cabinet and Pedestal Models
PSERVIC=X'01000000E100000000000000',
PSNDPAC=X'02',SRCVPAC=X'02',SSNDPAC=X'00'
SETUPHDR,CONSOLE
CKTPAGE=30