Paper Specifications; Paper; Labels - IBM 6400 Setup Manual

Paper Specifications

NOTE: The following paper specifications are general guidelines. Paper

Paper

Type:
Form Thickness:
Drive:
Slew Rate:
6400–050
6400–P50
6400–010
6400–P10
6400–015
6400–015 w/Stacker

Labels

On Backing:
Sheet Size:
stock should be tested with applications to determine print quality.
Edge–perforated, fan–fold, 3 to 17 inches (7.62 to
43.18 cm) wide*, 2 to 24 inches (5.08 to 60.96 cm)
long**
Single–part: 15 pound (57 g/m
2
g/m
Multi–part carbon: 1– to 6–part forms, maximum
12 pound (45 g/m
Multi–part carbonless, maximum of 6–part forms.
Test readability of greater than 4–part forms.
0.025 inches (0.064 cm) maximum
Adjustable tractors (6–pin engagement)
Fast
12 ips
12 ips
20 ips
16 ips
20 ips
25 ips
One–part continuous perforated fan–fold back form.
Labels must be placed at least 1/6 inch (0.42 cm)
from the fan–fold perforation. Backing adhesive
must not be squeezed out during printing.
3 to 17 inches (7.62 to 43.18 cm) wide*, including
the two standard perforated tractor feed strips. A
maximum sheet length of 16 inches (40.64 cm)
between top and bottom perforations.**
) stock.
2)
ply of upper plies.
Slow
8 ips
8 ips
8 ips
8 ips
10.4 ips
10.4 ips
Appendix A. Printer Specifications
2
) to 100 pound (377
A–3