Ascii Printer Emulation - IBM 6400 Setup Manual

Your printer can support many emulations: Proprinter III XL, Epson,
P–Series, P–Series XQ, and Serial Matrix. These emulations are included
with your printer.
Your printer can support other emulations: IPDS, Code V, and IGP. These
emulations are features that must be ordered separately. (These features may
have been installed at the factory if the features were ordered with the
printer.) For the IPDS Coax/Twinax emulation, the IBM Coax/Twinax
feature must be installed.
All the emulations contain the same configuration submenus shown on page
4–9. The "EMULATION CONFIGURATION" submenu, however, is
unique for each emulation; refer to Appendix E for optional emulation
feature configuration menus.
For more information on these features, refer to the documentation shipped
with the feature or to the "Related Documents" section that begins on
page 1–3.

ASCII Printer Emulation

This parameter selects one of the following ASCII printer emulations as the
active emulation:
PROPRINTER III XL EMULATION (the default)
EPSON EMULATION
P–SERIES EMULATION
P–SERIES XQ EMULATION
SERIAL MATRIX EMULATION
The configuration for the active emulation is selected from the Printer
Emulation Configuration menu, described on pages 4–61 through 4–63.
Chapter 4. Configuration Menus 4–59