Setting Up The Power Paper Stacker - IBM 6400i Setup Manual

Setting Up The Power Paper Stacker

Figure 56. Cabinet Model Rear Door Open Showing Rear Operator Panel
1. Turn the printer ON.
2. Using the rear operator panel, press ONLINE to take the printer offline.
3. Grasp the elevator lift handle and press the elevator disable switch while
raising the elevator to the top of its travel.
Figure 57. Rear View of Cabinet Model Showing Power Stacker Components
4. Make sure the wire paper tent is fitted in the pull out paper tray in the base
of the stacker.
Setting Up The Power Paper Stacker
A
Elevator Disable Switch
Elevator Lift Handle
Paper Tray
A
Paper
Advance
Stacker Up
Stacker
Down
Wire Paper Tent
73