Character Filtering - IBM 6400 Setup Manual

Disable. Does not print an error for invalid bar code data and the bar
code will be printed as is.

Character Filtering

Ignore Characters
Determines if character filtering is enabled, or if one or both characters are
ignored.
Disable. The default. Does not ignore the characters selected with the
select character options.
Character 1. The character selected using the Select Character 1 option
will be ignored in the data string.
Character 2. The character selected using the Select Character 2 option
will be ignored in the data string.
Character 1 and 2. Both characters selected using the Select Character 1
and Select Character 2 options will be ignored in the data string.
Select Character 1
Selects character 1 for the character filtering option. Valid values are from 0
through 255 (decimal). The default value is 0.
Select Character 2
Selects character 2 for the character filtering option. Valid values are from 0
through 255 (decimal). The default value is 0.
Appendix E. Code V, IGP, and IPDS Menus E–11