Error Handling - IBM 6400 Setup Manual

Disable. If disabled, it will allow the special font characters to be
expanded.
Inline Graphics
Enable. Permits Code V graphics to start in the middle of a print line as
opposed to moving to the beginning of the line to start a graphic.
Disable. The default. Requires the printer move to the beginning of the
line to start a graphic.

Error Handling

Error Messages
Disable. Suppresses error checking and error messages.
Enable. The default. Checks command syntax and prints error messages
when command parameters are incorrect.
Error Markers
Enable. The default. Prints the following error markers for those
elements that print beyond the page boundaries:
>> for elements that begin off the right side
<< for elements that begin at the indicated position
Disable. Does not print error markers for those elements that print
beyond the page boundaries.
Off Page Errors
Disable. The default. Does not report errors for elements that start or end
beyond the right edge of the page.
Enable. Reports errors for elements that start or end beyond the right
edge of the page.
Bar Code Errors
Enable. The default. Prints an error message when invalid bar code data
is encountered.
E–10 6400 Line Matrix Printers Setup Guide, Cabinet and Pedestal Models
of the page;
but end off the page;
for elements where the starting position of the
command contains an error other than an off–page error.