IBM 6400 Setup Manual page 97

CONFIGURATION
MANAGEMENT
Recall Save Current
Custom Set Values
* = Factory Default
The Print Custom Set Values selection on the Configuration Management menu
allows you to print any or all of the configurations shown above. The default
setting, "Current Custom Set," will print the same information as pressing the
Printer Configuration key. The Current Custom Set is the Power On
configuration until you begin modifying the printer configuration.
Custom sets 1 through 4 do not exist until you save configuration parameters
to them. You must define and save a custom set before you can print it.
Custom/Preloaded Sets 5–8 contain configuration sets that assist with the
installation and configuration of this printer.
The other options will only be useful once you have modified and saved the
printer configuration parameter settings.
The Power On Custom Set is defined by the "Change Power On Set" option.
Custom Sets 1 through 8 are defined by the "Save Current Values" option.
These options are described in detail under the Configuration Management
Menu description starting on page 4–18.
Delete Change
Custom Set Power On Set
Chapter 3. Configuring the Printer
Protect Print Custom
Custom Sets Set Values
Current Custom Set*
Factory Default
Power On Custom Set
All Custom Sets
Custom Set 1
Custom Set 2
Custom Set 3
Custom Set 4
Custom/Preloaded Set 5
Custom/Preloaded Set 6
Custom/Preloaded Set 7
Custom/Preloaded Set 8
3–9