Running The Printer Self-Tests - IBM 6400 Setup Manual

Running the Printer Self-Tests

Step Key
1.
Make sure that the ribbon is installed and the printer is powered on and loaded with paper.
2.
Press:
Stop
3.
Scroll
4.
Menu
5.
Scroll
6.
Enter
7.
Scroll
8.
Enter
9.
Enter
Result
NOT READY
OPERATOR MENU
+
Scroll
UNLOCKED
OPERATOR MENU
PRINTER CONTROL
OPERATOR MENU
UNTIL
OPERATOR PRINT TESTS
OPERATOR PRINT TESTS
PRINTER DEMONSTRATION*
OPERATOR PRINT TESTS
UNTIL
[TEST NAME]
OPERATOR PRINT TESTS
[TEST NAME]
OPERATOR PRINT TESTS
[TEST NAME]
Chapter 6. Routine Service and Diagnostics
Notes
Places the printer in Not
READY mode.
Press both keys at the same
time. Unlocking the Operator
Menu allows you to test your
printer.
First of the series of
configuration menus.
Advances to the
OPERATOR PRINT TESTS
menu.
Advances to PRINTER
DEMONSTRATION, the
first option in OPERATOR
PRINT TESTS menu.
Cycles through the list of
print tests until you reach the
name of the test you wish to
run.
The print test you have
selected starts printing at
either 80 or 136 columns, as
specified.
The print test stops printing.
6–7