Pi Slew Range; Cr Edit; Select Font - IBM 6400 Setup Manual

PI Slew Range

You can specify how many lines the paper will feed.
15. A paper slew of 1–15 will move 1–15 lines. A paper slew of 0 will
move 1 line.
16. The default. A paper slew of 0–15 will move 1–16 lines.

CR Edit

This parameter determines if a carriage return will be followed by a line feed.
Disable. The default. The printer ignores all carriage returns that are not
followed by line feeds.
Enable. The printer processes all carriage returns, even for those that are
not followed by line feeds.

Select Font

This parameter allows you to select a font for the IGP feature. The default is
0, which is U.S. ASCII. Valid selections are 0 to 33. The following
predefined values are available:
0 U.S. ASCII
1 German
2 Swedish
3 Danish
4 Norwegian
5 Finnish
6 English
7 Dutch
8 French
9 Spanish
10 Italian
11 Turkish
12 0858 PC Euro Multilingual
13 0923 Latin 9 8859–15
Values 14–23 are undefined and will default to 0. You can set values 24–31
to specific fonts; refer to the USET command.
Appendix E. Code V, IGP, and IPDS Menus E–17