Lines Per Inch; Mono/Dual Case; Skip Command Prefix - IBM 6400 Setup Manual

Slash Ø
This option allows you to select is zeros will print with or without a
slash (Ø).
Disable. The default. Prints zeros without a slash (0).
Enable. Prints zeros with a slash (Ø) to distinguish zeros from the
alphabetical capital "O."

Lines Per Inch

This is the number of lines to be printed per inch. For example, at 6 lpi there
is 1/6–inch from the top of one print line to the top of the next print line. The
following number of lines per inch may be selected:
6 The default.
8
9
10

Mono/Dual Case

This parameter enables the printer to print text in all uppercase when using
the ALPHA command.
Dual Case. The default. The printer will print text in upper– and
lowercase.
Mono Case. The printer will print text in uppercase only.

Skip Command Prefix

This parameter determines if a data string before an IGP command will be
ignored.
Disable. The printer will print any data before an IGP command.
Enable. The default. The printer ignores all text before an IGP
command.
E–18 6400 Line Matrix Printers Setup Guide, Cabinet and Pedestal Models