Sharp MX-M264U Service Manual page 137

56
56-1
Purpose Backup
Function (Purpose) Used to transport data between HDD - MFP
PWB SRAM/EEPROM. (Used to repair the
PWB.)
Section
Operation/Procedure
1) Select a target content of data transfer.
2) Press [EXECUTE] key and press [YES] key.
Data transfer of the item selected in procedure 1) is executed.
When the operation is completed normally, "COMPLETE" is
displayed. In case of an abnormal end, "ERROR" is displayed.
EEPROM  HDD
Transfer from EEPROM to HDD
HDD  EEPROM
Transfer from HDD to EEPROM
56-2
Purpose Data backup
Function (Purpose) Used to backup the data in the EEPROM.
SD Card, and HDD (including user authen-
tication data and address data) to the USB
memory. (Corresponding to the device
cloning and the storage backup.)
Section
Operation/Procedure
1) Insert the USB memory into the main unit.
2) Select a target transfer item with the touch panel.
<IMPORT>
From USB MEMORY DEVICE To EEPROM, SD Card HDD
<EXPORT>
From EEPROM, SD Card, HDD To USB MEMORY
3) Press [EXECUTE] key, and press [YES] key.
Data transfer selected in the procedure 2) is performed
When the operation is completed normally, "COMPLETE" is
displayed. In case of an abnormal end, "ERROR" is displayed.
Machine with the DSK installed
1) Insert the USB memory into the main unit.
2) Select a target transfer item with the touch panel.
• IMPORT
From USB MEMORY DEVICE to EEPROM, SD Card HDD
• EXPORT
From EEPROM, SD Card, HDD to USB MEMORY DEVICE
3) Enter the password with 10-key.
4) Press [SET] key.
5) Press [EXECUTE] key, and press [YES] key.
Data transfer selected in the procedure 2) is performed.
When the operation is completed normally, "COMPLETE" is
displayed. In case of an abnormal end, "ERROR" is displayed.
Data list outside the backup targets
EEPROM/SD Card
PWB Type
Controller
PCU
SCU
HDD
Classifi-
cation
Japanese
FEP
Job end list
Log
New N/A
Operation
manual
56-3
Purpose
Function (Purpose) Used to backup the document filing data to
Section
Operation/Procedure
1) Insert the USB memory into the main unit.
2) Select a target transfer item with the touch panel.
<IMPORT>
From USB MEMORY DEVICE to EEPROM, SD Card, HDD
<EXPORT>
From EEPROM, SD Card, HDD to USB MEMORY DEVICE
3) Press [EXECUTE] key, and press [YES] key.
Data transfer selected in the procedure 2) is performed.
When the operation is completed normally, "COMPLETE" is
displayed. In case of an abnormal end, "ERROR" is displayed.
56-4
Purpose
Function (Purpose) Used to backup the JOB log data to the
Section
Operation/Procedure
1) Insert the USB memory into the main unit.
2) Press [JOB LOG EXPORT] key.
3) Press [EXECUTE] key, and press [YES] key.
Data transfer selected in the procedure 2) is performed.
When the operation is completed normally, "COMPLETE" is
displayed. In case of an abnormal end, "ERROR" is displayed.
MX-M264U SIMULATION 6 – 63
Content
Machine serial No.
Product key information
Various counter
Trouble history
Machine serial No.
Various counter
Machine adjustment execute
history
Trouble history
Various counter
Trouble history
Content
User dictionary
Job end list display data
(The image send series include
the preserved job list.)
Job log
• Print history information
• JAM history information
• Trouble history information
• Same position continuous jam
count value
• Charging information
• Life information
E-manual
Data backup
the USB memory.
Data backup
USB memory.
NOTE
Copy counter/FAX
send counter etc.
Maintenance counter
Maintenance counter
NOTE
Read from WEB is
enable.