Sharp MX-M264U Service Manual page 136

53-8
Purpose Adjustment
Function (Purpose) Used to adjust the document lead edge ref-
erence and the RSPF mode document
scan position.
Section
Operation/Procedure
Select an adjustment item with [AUTO] [MANUAL] key.
AUTO: Document lead edge reference (RRCA) adjustment
(Auto adjustment)
1) Set a sheet of black paper of A4 or 11"x 8.5" on the document
table.
2) Press [EXECUTE] key. (The adjustment is performed and the
adjustment value is saved.)
Item/Display Content
MEASUREMENT Document lead edge
DISTANCE measurement distance
RRCA Document lead edge
reference position
MANUAL: RSPF mode document scan position adjustment
1) Enter the set value with 10-key.
2) Press [OK] key. (The set value is saved.)
Item/Display Content
A ADJUST RSPF mode document scan
VALUE position adjustment (Scanner
stop position adjustment)
• When the adjustment value is increased, the scanner stop posi-
tion in the RSPF mode is shifted to the right.
• When the adjustment value is changed by 1, the position is
shifted by 0.1mm.
55
55-1
Purpose (Do not use this function unless specially
required.)
Function (Purpose) Used to set the specifications of the engine
control operations. (SOFT SW)
Section
Operation/Procedure
55-2
Purpose (Do not use this function unless specially
required.)
Function (Purpose) Used to set the specifications of the scan-
ner control operation. (SOFT SW)
Section
Operation/Procedure
55-3
Purpose (Do not use this function unless specially
required.)
Function (Purpose) Used to set the specifications of the control-
ler operation. (SOFT SW)
Section
Operation/Procedure
55-10
Purpose
Function (Purpose) Used to set the special stamp text. (Taiwan
Section
Operation/Procedure
1)
2)
3)
Setting Default
range value
0-255 -
(0.1mm unit)
0 - 99 50
Setting Default
range value
1 - 99 5
Input value
MX-M264U SIMULATION 6 – 62
Adjustment/Setting
only)
Select an item to be set (digit, color, type) with the scroll key.
Enter the value corresponding to the setting item with 10-key.
Press [OK] key. (The set value is saved.)
Item/Display
A 1ST DIGIT First digit (left edge)
B 2ND DIGIT Second digit
C 3RD DIGIT Third digit
D 4TH DIGIT Fourth digit
E 5TH DIGIT Fifth digit
F 6TH DIGIT Sixth digit (right
edge)
G COLOR K Color specification
input
C
M
Y
R
G
B
H TYPE PATTERN Print
1 com-
posing
PATTERN
method
2
PATTERN
3
Print Blank A B
Input value 32 65 66
Print H I
Input value 72 73 74
Print O P Q
Input value 79 80 81
Print W X Y
Input value 87 88 89
Print 3 5
Input value 51 53 54
Setting Default
Content
range value
1 - 90 1
32 [blank:
20H]
65 - 90
[Alphabet:
41H("A) -
5AH("Z")]
48 - 57
[Numeral:
30H("0") -
39H("9")]
0 0
1
2
3
4
5
6
Edging 0 1
type
OR 1
process
type
No- 2
delete-
compo-
sition type
C E F
67 69 70
J K L M
75 76 77
R T U
82 84 85
Z 0 1
90 48 49
6 7 8 9
55 56 57
G
71
N
78
V
86
2
50