Sharp MX-M264U Service Manual page 117

44
44-1
Purpose Setting
Function (Purpose) Used to set each correction operation func-
tion in the image forming (process) section.
Section Image process (Photoconductor/Develop-
ing/Transfer/Cleaning)
Operation/Procedure
1) Select an item to be set with the touch panel.
(The selected item is highlighted.)
2) Press [EXECUTE] key. (The set value is saved.)
CAUTION: Set the items to the default values unless a change is
specially required.
Item/Display
MD_VG Membrane decrease (GB) Enable/Disable setting
MD_DV_LIFE DV life correction (GB, DVD) Enable/Disable setting
MD_ENV Environment correction (GB, DVD) Enable/Disable setting
MD_DUPLEX Duplex print correction (GB, DVD) Enable/Disable setting
MD_LD Membrane decrease life correction (laser power) Enable/Disable setting
MD_LD_ENV Environment correction (laser power) Enable/Disable setting
TN_LIFE Enable/Disable setting of the toner density life correction
TN_ENV Enable/Disable setting of the toner density environment correction
TN_DUPLEX Toner density duplex print correction Enable/Disable setting
TN_COV Enable/Disable setting of the toner density print ratio correction
TN_AREA Enable/Disable setting of the toner density area correction
TN_DRIP Enable/Disable setting of the toner density correction unconditional supply
TC Enable/Disable setting of the transfer output correction
44-9
Purpose Operation data display
Function (Purpose) Used to display the result data of the high
density process control operation.
Section Image process (Photoconductor/Develop-
ing/Transfer/Cleaning)
Operation/Procedure
Select a target display mode with [CPY/PRN], [OTHER] keys.
Mode
CPY/ 1/2 (PROCESS) REF (TS_OFF)
1
PRN*
ALL (TS_OFF)
REF (TS_ON_C)
ALL(TS_ON_C)
REF (TS_ON_P)
ALL (TS_ON_P)
MD_VG
MD_DV_LIFE
MD_ENV
MD_DUPLEX
Content
Item/Display
Page number (*: Correction
value)
Left GB ***
Right DVB ***
Left GB ***
Right DVB ***
Left GB ***
Right DVB ***
Left GB ***
Right DVB ***
Left GB ***
Right DVB ***
Left GB ***
Right DVB ***
Left GB ***
Left GB ***
Right DVB ***
Left GB ***
Right DVB ***
Left GB ***
Right DVB ***
MX-M264U SIMULATION 6 – 43
Setting range
Black text on
white
background
(Inhibit: 0=NO)
White text on
black
background
(Allow: 1=YES)
Content
GB/DVB default value when TS is OFF
GB/DVB value after addition or
subtraction of the correction amount
when TS is OFF
Copy GB/DVB default value when TS is
ON
GB/DVB value after addition or
subtraction of the correction amount
when Copy TS is ON.
Printer GB/DVB default value when TS is
ON
GB/DVB value after addition or
subtraction of the correction amount
when Printer TS is ON
Drum membrane decrease correction
amount GB value
Process developer life correction amount
GB/DVB value
Environment correction amount GB/DVB
value
Duplex print correction amount GB/DVB
value
Default value NOTE
Enable
Enable
Enable
Enable
Enable
Enable
Enable
Enable
Enable
Enable
Enable
Enable
Enable
Default
Display range
value
0 - 750 590
0 - 650 450
0 - 750 590
0 - 650 450
0 - 750 460
0 - 650 320
0 - 750 460
0 - 650 320
0 - 750 390
0 - 650 250
0 - 750 390
0 - 650 250
0 - 255 0
–127 - +127 0
–127 - +127 0
–127 - +127 0
–127 - +127 0
0 - 255 0
0 - 255 0