Sharp MX-M264U Service Manual page 103

26-78
Purpose Setting
Function (Purpose) Used to set the password of the remote
operation panel.
Section
Operation/Procedure
1) Enter a password with 10-key. (5 - 8 digits)
The entered password is displayed on the column of "NEW".
In order to correct the entered password, press the [clear] key
to delete the entered value one digit by one digit.
2) Press [SET] key.
26-79
Purpose Setting
Function (Purpose) Used to set YES/NO of the pop-up display
of user data delete result.
Section
Operation/Procedure
1) Enter the set value with 10-key.
The value for the display operation specification after comple-
tion of user data delete is set.
2) Press [OK] key.
Item/Display Content
A DISP SET User data delete result
pop-up display ON
User data delete result
pop-up display OFF
Default
Setting range
value
YES 1 0 (NO)
NO 0
MX-M264U SIMULATION 6 – 29
27
27-1
Purpose Setting
Function (Purpose) Used to set non-detection of communica-
tion error (U7-00) with RIC. (FSS function)
Section
Operation/Procedure
1) Enter the set value with 10-key.
0 Not detection
1 Detection
2) Press [OK] key.
The set value in step 1) is saved.
27-2
Purpose Setting
Function (Purpose) Used to set the sender's registration num-
ber and the HOST server telephone num-
ber. (FSS function)
Section
Operation/Procedure
1) Select an item to be set with touch panel.
[USER FAX NO] [SERVA TEL NO]
2) Enter the set value with 10-key.
3) Press [SET] key.
The set value in step 2) is saved.
USER FAX_NO. Sender registration number (Max. 16 digits)
SERVA TEL_NO. Host server telephone number (Max. 16 digits)
• If the connection process is not completed
normally when registering the FSS, calling to the
HOST may be continuously made every time
when the power is turned ON (from OFF) or
rebooted.
In this case, enter "********" to inhibit calling to the
HOST.