Sharp MX-M264U Service Manual page 128

Item/Display Content
SCU (BOOT) SCU Boot section
SCU (MAIN) SCU Main section
FAX (BOOT) FAX1 Boot section
FAX (MAIN) FAX1 Main section
ANIMATION Animation data
WEB HELP WEB help
49-3
Purpose
Function (Purpose) Used to update the operation manual in the
HDD.
Section
Operation/Procedure
1) Insert the USB memory into the main unit.
* When the USB is not inserted, "INSERT A STORANGE E-
MANUAL STORED ON" is displayed. When [OK] key is
pressed, the display is shifted to the folder select menu 1.
2) Press the folder button of the operation manual data. (The dis-
play is shifted to the operation manual update menu.)
The current version and the update version are displayed.
3) Press [EXECUTE] key.
[EXECUTE] key is highlighted, and [YES] [NO] keys becomes
active from gray out.
4) When [YES] key is pressed, the selected operation manual is
updated.
When update is completed normally, "COMPLETE" is dis-
played. When terminated abnormally, "ERROR" is displayed.
49-5
Purpose
Function (Purpose) Used to perform the watermark update.
Section
Operation/Procedure
1) Insert the USB memory into the main unit.
2) Select the button of the folder to perform the watermark
update.
3) The current version and the update version are displayed.
4) Press [EXECUTE] key.
5) Press [YES] key.
The selected watermark is updated.
50
50-1
Purpose Adjustment
Function (Purpose) Copy image position, image loss adjust-
ment
Section
Operation/Procedure
1) Select an adjustment target item with scroll key on the touch
panel.
2) Enter the set value with 10-key.
Set the items other than RRCA, LEAD, and SIDE to the
default.
RRCA: Image lead edge reference position adjustment
LEAD: Lead edge image loss adjustment
SIDE: Side image loss adjustment
3)
Error display in
case of abnormality
SCUB
SCUM
A
FAXB
FAXM
ANIME
B
WEBHP
C
D
E
F
G
H
K
L
M
N
O
P
Q
R
S
A. (RRC-A) Timing from starting document scanning to specifying
B - E. (RRC-B) The timing to turning ON the registration roller after
F. (LEAD) The lead edge image loss amount is adjusted. (0.1mm/
G. (SIDE) The side image loss amount is adjusted.
H. (DEN-A) The paper lead edge void amount is adjusted. (0.1mm/
I. (DEN-B) The paper rear edge void amount is adjusted. (0.1mm/
J. (FRONT/REAR) The void amount on the right and left edges of
MX-M264U SIMULATION 6 – 54
Press [OK] key. (The set value is saved.)
Item/Display
Lead RRCA Document lead
edge edge reference
adjust- position (OC)
ment
RRCB- Regis-
value
CS12 tration
motor
RRCB-DSK
ON
RRCB-MFT
timing
adjust-
ment
RRCB-ADU
Image LEAD Lead edge image
loss area loss area setting
setting
SIDE Side image loss
value
area adjustment
Void area DENA Lead edge void
adjust- area adjustment
ment
I DENB Rear edge void
area adjustment
J FRONT/ FRONT/REAR void
REAR area adjustment
Off-center OFFSET_ OC document off-
adjust- OC center adjustment
ment
Magnificat SCAN_ SCAN sub scanning
ion ratio SPEED_ magnification ratio
correction OC adjustment (CCD)
Sub DENB-MFT Manual feed
scanning correction value
direction
DENB-CS1 Tray 1 correction
print area
value
correction
DENB-CS2 Tray 2 correction
value
value
DENB-CS3 Tray 3 correction
value
DENB-CS4 Tray 4 correction
value
DENB-ADU ADU correction
value
DENB-HV Heavy paper
correction value
the image lead edge reference is adjusted. (01.mm/step)
* When the value is decreased, the timing is advanced. When
the value is increased, the timing is delayed.
receiving the registration signal is adjusted. (0.1mm/step)
* When the value is decreased, the timing is delayed. When the
value is increased, the timing is advanced.
step)
* When the value is increased, the image loss is increased.
* When the value is increased, the image loss is increased.
(0.1mm/step)
step)
* When the value is increased, the void is increased.
step)
* When the value is increased, the void is increased.
paper is adjusted. (0.1mm/step)
Setting Default
Content
range value
0 - 99 50
Standard 1 - 99 50
Tray
Desk 1 - 99 50
Manual 1 - 99 50
paper
feed
ADU 1 - 99 50
0 - 99 40
0 - 99 20
1 - 99 30
1 - 99 30
1 - 99 20
1 - 99 50
1 - 99 50
1 - 99 57
1 - 99 50
1 - 99 57
1 - 99 57
1 - 99 57
1 - 99 60
1 - 99 50