Sharp MX-M264U Service Manual page 133

50-27
Purpose Adjustment
Function (Purpose) Used to perform the image loss adjustment
of scanned images in the FAX or image
send mode.
Section
Operation/Procedure
1) Select a target adjustment mode with [FAX] or [SCANNER]
key.
2) Select an adjustment target item with scroll key on the touch
panel.
3) Enter the set value with 10-key.
4) Press [OK] key. (The set value is saved.)
Item/Display
FAX send A Image loss
amount setting
B
OC
C
D Image loss
amount setting
E
SPF SIDE1
F
G Image loss
amount setting
H
SPF SIDE2
I
When A Image loss
image amount setting
B
send mode OC
C
(Except for
D Image loss
FAX and
amount setting
E
copy)
SPF SIDE1
F
G Image loss
amount setting
H
SPF SIDE2
I
A-I: When the adjustment value is increased, the image loss is increased.
1step = 0.1mm
50-28
Purpose Adjustment
Function (Purpose) Used to automatically adjust the image
loss, void area, image off-center, and image
magnification ratio.
Section
Operation/Procedure
The following adjustment items can be executed automatically with
SIM50-28.
* ADJ 12 Print image position, image magnification ratio, void
area, off-center adjustments (Manual adjustments)
* ADJ 13 Scan image magnification ratio adjustment (Manual
adjustment)
* ADJ 14 Scan image off-center adjustment (Manual adjustment)
* ADJ 15 Used to adjust the copy image position and the image
loss (Manual adjustments)
1) Select an adjustment item with the menu button.
2) Press [EXECUTE] key, and the adjustment pattern is printed.
3) Set the adjustment pattern on the document table.
4) Press [EXECUTE] key, and the adjustment pattern is scanned.
5) Press [OK] key.
LEAD_EDGE (OC)
FRONT_REAR (OC)
TRAIL_EDGE (OC)
LEAD_EDGE (SPF_SIDE1)
FRONT_REAR (SPF_SIDE1)
TRAIL_EDGE (SPF_SIDE1)
LEAD_EDGE (SPF_SIDE2)
FRONT_REAR (SPF_SIDE2)
TRAIL_EDGE (SPF_SIDE2)
LEAD_EDGE (OC)
FRONT_REAR(OC)
TRAIL_EDGE(OC)
LEAD_EDGE (SPF_SIDE1)
FRONT_REAR (SPF_SIDE1)
TRAIL_EDGE(SPF_SIDE1)
LEAD_EDGE (SPF_SIDE2)
FRONT_REAR (SPF_SIDE2)
TRAIL_EDGE(SPF_SIDE2)
MX-M264U SIMULATION 6 – 59
Content
OC lead edge image loss amount setting
OC side image loss amount setting
OC rear edge image loss amount setting
Front surface lead edge image loss amount setting
Front surface side image loss amount setting
Front surface rear edge image loss amount setting
Back surface lead edge image loss amount setting
Back surface side image loss amount setting
Back surface rear edge image loss amount setting
OC lead edge image loss amount setting
OC side image loss amount setting
OC rear edge image loss amount setting
Front surface lead edge image loss amount setting
Front surface side image loss amount setting
Front surface rear edge image loss amount setting
Back surface lead edge image loss amount setting
Back surface side image loss amount setting
Back surface rear edge image loss amount setting
Item/Display
OC ADJ MFT Document lead
edge
CS1
CS2
Document off-
center
Sub scanning
magnification ratio
Item/Display
SPF ALL SIDE1
ADJ (Front
(RSPF) surface)
SIDE2
(Back
surface)
Setting range Default value
0 - 100 30 (3mm)
0 - 100 20 (2mm)
0 - 100 20 (2mm)
0 - 100 20 (2mm)
0 - 100 20 (2mm)
0 - 100 30 (3mm)
0 - 100 20 (2mm)
0 - 100 20 (2mm)
0 - 100 30 (3mm)
0 - 100 0 (0mm)
0 - 100 0 (0mm)
0 - 100 0 (0mm)
0 - 100 0 (0mm)
0 - 100 0 (0mm)
0 - 100 0 (0mm)
0 - 100 0 (0mm)
0 - 100 0 (0mm)
0 - 100 0 (0mm)
Content
Image loss off-
center sub scanning
direction image
magnification ratio
adjustment
(Document table
mode)
Content
MFT Document Image loss
lead edge off-center
sub
Document scanning
CS1
off-center direction
CS2
Sub image
scanning magnifica-
magnifica- tion ratio
tion ratio adjustment
Document (RSPF
lead edge mode)
Document
off-center
Sub
scanning
magnifica-
tion ratio
Section
Scanner
Section
Scanner