Sharp MX-M264U Service Manual page 101

2) Press [OK] key.
The set value in step 1) is saved.
Destination
U.S.A 0 (Counted)
CANADA 0 (Counted)
INCH 0 (Counted)
JAPAN 1 (Not counted)
AB_B 0 (Counted)
EUROPE 0 (Counted)
U.K. 0 (Counted)
AUS. 1 (Not counted)
AB_A 0 (Counted)
CHINA 0 (Counted)
26-56
Purpose Setting
Function (Purpose) Used to set ON/OFF of the Life Correction.
Section
Operation/Procedure
1) Select an item to be set with scroll keys.
2) Enter the set value with 10-key.
3) Press [OK] key. (The set value is saved.)
Item/Display Content
A AUTO1 Life correction of Auto 1 is
turned ON.
Life correction of Auto 1 is
turned OFF.
B AUTO2 Life correction of Auto 2 is
turned ON.
Life correction of Auto 2 is
turned OFF.
C TEXT Life correction of Text is
turned ON.
Life correction of Text is
turned OFF.
D TEXT/ Life correction of Text/Printed
PRINTED Photo is turned ON.
PHOTO
Life correction of Text/Printed
Photo is turned OFF.
E TEXT/ Life correction of Text/
PHOTO Photograph is turned ON.
Life correction of Text/
Photograph is turned OFF.
F PRINTED Life correction of Printed
PHOTO Photo is turned ON.
Life correction of Printed
Photo is turned OFF.
G PHOTOG Life correction of Photograph
RAPH is turned ON.
Life correction of Photograph
is turned OFF.
H MAP Life correction of Map is
turned ON.
Life correction of Map is
turned OFF.
Default
Setting Default
range value
0 - 1 1 1 (ON)
0
0 - 1 1 1 (ON)
0
0 - 1 1 0 (OFF)
0
0 - 1 1 0 (OFF)
0
0 - 1 1 0 (OFF)
0
0 - 1 1 1 (ON)
0
0 - 1 1 1 (ON)
0
0 - 1 1 0 (OFF)
0
MX-M264U SIMULATION 6 – 27
26-65
Purpose Setting
Function (Purpose) Used to set the finisher alarm mode.
Section
Operation/Procedure
Use the touch key to set.
Set
Item Content
value
LIMIT ON Number of
COPIES sets of
stapling:
Max. 50 sets
OFF Number of
sets of
stapling:
Not Limited
26-69
Purpose Setting
Function (Purpose) Used to set the operating conditions for
toner near end.
Section
Operation/Procedure
1) Select an item to be set with scroll keys.
2) Enter the set value with 10-key.
3) Press [OK] key.
The set value in step 2 is saved.
Item/Display
A TONER 0 The toner
PREPARATION preparation
(0:YES 1:NO) message is
displayed.
1 The toner
preparation
message is not
displayed.
B REMAINING 0.05 0 Toner
TONER preparation at
LEVEL remaining toner
level of 5%
0.1 1 Toner
preparation at
remaining toner
level of 10%
0.15 2 Toner
preparation at
remaining toner
level of 15%
0.2 3 Toner
preparation at
remaining toner
level of 20%
0.25 4 Toner
preparation at
remaining toner
level of 25%
0.3 5 Toner
preparation at
remaining toner
level of 30%
0.35 6 Toner
preparation at
remaining toner
level of 35%
0.4 7 Toner
preparation at
remaining toner
level of 40%
Setting Default
NOTE
range value
ON or ON
OFF
Setting Default
Content
range value
0 - 1 List of
Default
values and
set values
for each
destination
0 - 9 4