Table of Contents
Advertisement
Figure 39
The Enterasys Dual HSSI line card uses standard copper twisted-pair cable with identical
50-pin HSSI connectors at each end to attach to a CSU/DSU module.
To attach the segment cables to your Dual HSSI line card:
1.
Obtain a Enterasys 50-pin HSSI connector cable (part number SYS-HSSI-CAB) and
connect either end of the HSSI connector cable to the XP WAN interface you wish to
use.
2.
Plug the remote end of the connector cable into the HSSI CSU/DSU data port you
wish to use.
Enterasys Xpedition 8000/8600 Getting Started Guide
shows the pin positions in the 50-pin HSSI connector.
25
50
Figure 39. 50-pin HSSI connector
Installing the Hardware
1
26
75
Advertisement
Table of Contents
