Table of Contents
Advertisement
LED
Per-port Rx
Per-port Tx
Per-port AN
1000Base-LX (T-Series) Line Card
The 1000Base-LX (T-Series) line card provides the same features as the 1000Base-SX line
card, but supports singlemode fiber (SMF) as well as MMF.
panel of the 1000Base-LX (T-Series) line card.
G8M-GLXB9-02
Enterasys Xpedition 8000/8600 Getting Started Guide
Description
•
Green – indicates when the port's transceiver receives
packets.
•
Orange – indicates when the port's transceiver receives
flow-control packets.
•
Green – indicates when the port's transceiver transmits
packets.
•
Orange – indicates when the port's transceiver transmits
flow-control packets.
•
Green – indicates that the line card has auto negotiated the
operating mode of the link between full-duplex and half-
duplex.
•
Orange (intermittent) – indicates that auto negotiation is in
process.
•
Orange (solid) – indicates a problem with auto negotiation
configuration.
•
Red – indicates an auto negotiation failure. This fault may
occur if the link partner does not support full duplex.
•
Off – indicates that auto negotiation has been disabled or
the link is down.
1
Tx
Link
Offline
Rx
AN
Online
Gigabit Port
Figure 13. Front panel of 1000Base-LX (T-Series) line card
Figure 13
1000BASE-LX
2
Tx
Link
Rx
AN
Gigabit Port
Hardware Overview
shows the front
Hot
Swap
27
Advertisement
Table of Contents
