Enterasys Xpedition 8000 Getting Started Manual page 56

Hide thumbs Also See for Xpedition 8000:
Table of Contents

Advertisement

Hardware Overview
LED
Per-port Link
Per-port Rx
Per-port Tx
Quad Serial – C and Quad Serial – CE Line Cards
The Quad Serial – C and Quad Serial – CE line cards each contain two dual-serial WAN
ports (two serial ports located on one high density connector). In addition, the Quad
Serial – C line card includes compression, and the Quad Serial – CE line card includes
compression and encryption, for each WAN port.
Quad Serial – CE WAN line card.
G8M-SECAC-04
42
Description
Green – indicates that the port hardware detects a cable
plugged into the port and a good link is established
Red (intermittent) – indicates that the port received an
error during operation
Red (solid) – indicates that the port hardware detects a
cable plugged into the port, however, a bad link is
established
Off – indicates that no link from the port exists
Green – indicates when the port's transceiver receives
packets
Red – indicates when the port's transceiver receives flow-
control packets
Green – indicates when the port's transceiver transmits
packets
Red – indicates when the port's transceiver transmits flow-
control packets
1
2
1,2
Link
Offline
Rx
Tx
Online
Figure 22. Front panel of Quad Serial – CE WAN line card
Figure 22
shows the front panel of the
Quad Serial - C
3
4
3,4
Link
Rx
Tx
Enterasys Xpedition 8000/8600 Getting Started Guide
Hot
Swap

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xpedition 8600

Table of Contents