Table of Contents
Advertisement
LEDs
The 10/100Base-TX line card uses the following LEDs.
LED
Offline
Online
Link
Activity
Enterasys Xpedition 8000/8600 Getting Started Guide
Description
When lit, this amber LED on the left side of the line card
indicates that the line card is offline (powered off) and is ready
for hot swap.
The Offline LED also is lit briefly during a reboot or reset of the
XP and goes out as soon as the control module discovers and
properly initializes the line card.
When lit, this green LED indicates that the line card is online
and is ready to receive, process, and send packets if configured
to do so.
Each port has two LEDs on its connector. The green LED on
the left side of the connector indicates the link status. When
this LED is lit, the port hardware is detecting that a cable is
plugged into the port and the port has established
communication with the device at the other end.
The amber LED on the right side of each port connector flashes
each time the port's transceiver sends or receives packets.
Hardware Overview
21
Advertisement
Table of Contents
