If You Experience This Difficulty...
The XP is not resolving DNS names.
An SNMP manager cannot access the
XP.
You are unable to ping a certain host.
Enterasys Xpedition 8000/8600 Getting Started Guide
Try this Remedy...
Use the procedure in Setting the DNS
Domain Name and Address
up DNS.
If you have already performed this
procedure, make sure you can use NS
lookup on the DNS server to get the default
domain.
Use the procedure in Setting Up SNMP
Community Strings
on page 84
SNMP community string and specify a
target for SNMP traps.
If you have already performed this
procedure, enter the snmp show all
command to check the SNMP settings.
Use the traceroute and ping commands to
verify that the XP can reach the SNMP
management station.
Create and add an IP or IPX interface for the
host. See the The TeraLink 2000 Series Library:
User Reference for information.
on page 88
to set
to set up an
99