Table of Contents
Advertisement
Sequencer mode
REC 1, 2, 1/2, REC 3, 4, 3/4: The REC 1/2 or REC 3/4
buses will be recorded. Choose this if you want to
record only the audio input while hearing the
sequencer playback and your keyboard playing from
the L/R outputs. You can also mix several audio inputs
to the REC buses, or use the REC buses to mix the
direct sound from the audio inputs with the sound
REC Source
= REC Bus 1 (2)
Audio CD
Sequencer Playback
Keyboard
Indiv.1...8, Indiv.1/2, Indiv.3/4, Indiv.5/6, Indiv.7/8:
The Indiv.1/2–Indiv.7/8 buses will be recorded.
Similarly to when using the REC buses, you can choose
this when you want to monitor the L/R output while
REC Source
= Indiv.1, 2 (3, 4, 5, 6, 7, 8)
Audio CD
Sequencer Playback
Keyboard
STEREO
This is shown if "Stereo Pair" is on.
Play/Rec/Mute
Use this to mute an audio track, or to select the
recording tracks for multi-track recording. During
playback, or for single-track recording (normal
recording), it is possible only to select Play or Mute for
tracks (playback tracks) other than the recording track.
424
L/R
Bus
REC Bus = 1,2
Insert
Effects
Level
Pan
Insert
Effects
Bus = L/R or IFX1-12
L/R
Bus
Insert
Effects
Level
Pan
Insert
Effects
Bus = L/R or IFX1-12
[Play, Rec, Mute]
processed by insert effects, and record the result. For
more information, see the diagram "REC Source = REC
Bus 1, 2."
If "Stereo Pair" is on, REC Bus 1 (3) is sent to odd-
numbered tracks, and REC Bus 2 (4) is sent to even-
numbered tracks.
REC
Indiv.
1,2, 3, 4
1,2,3,4,5,6,7,8
REC Source
REC1
Insert
Effects
If REC Source is set to REC Bus 1 or 2, setting the Audio Track REC Bus to 1 or 2 will
automatically cause the Rec input to be muted in order to avoid a feedback loop. If
you route the signal to IFX, the same thing will occur if you send the post-IFX signal to
REC Bus 1 or 2.
recording only the audio input. For more information,
see the diagram "REC Source = Indiv. 1, 2 (3, 4, 5, 6, 7,
8)."
If "Stereo Pair" is on and you've selected Indiv.1/2, the
Indiv. bus 1 will be sent to odd-numbered tracks, and
Indiv. bus 2 will be sent to even-numbered tracks.
Indiv.
REC
1,2,3,4,5,6,7,8
1,2, 3, 4
...
REC Source
Indiv.1
Indiv.2
Insert
Effects
If the Bus Select of an audio track is set to Indiv. 1 or 2, the Rec input will
automatically be muted in order to avoid a feedback loop. If you route the signal to
IFX, the same thing will occur if you send the post-IFX signal to REC Bus 1 or 2.
For multi-track recording, tracks can be set to Play, Rec,
or Mute. The setting will alternate each time you press
the Play/Rec/Mute button.
Play: The track will play.
Rec: This will be displayed during single-track
recording (normal recording). It cannot be selected.
When you use multi-track recording (the Preferences
page "Multi REC" is on), select REC for the tracks that
you wish to record. You can specify REC for up to four
tracks.
Mute: The track will be muted (silent).
Recording
CLIP !
HDR Track (Mono)
Audio Track selected in
Track Select
Pan
Bus = L/R or IFX1-12
Monitor
L/MONO
R
[x] Source Direct Solo
Recording (Multi REC)
CLIP !
HDR Track (Mono)
HDR Track (Mono)
Set Play/Rec/Mute
to Rec
Pan
Bus = L/R or IFX1-12
Monitor
L/MONO
R
[x] Source Direct Solo
INDIV.1
INDIV.2
Level
AUDIO OUTPUT
HEADPHONES
Level
AUDIO OUTPUT
HEADPHONES
AUDIO OUTPUT
Advertisement
Table of Contents
