124: Limiter - Multitap Delay; 125: Exciter - Comp - Korg Electronic Keyboard Parameter Manual

Resonance
Sets the resonance amount. p.805.
Output Mode
Selects whether the phaser output is mono or pseudo-
stereo. For more information, see "Output Mode" on
page 857.
When Routing is set to Phaser→ → → → Comp, Output Mode
will automatically be set to Normal.
Wet/Dry
Sets the phaser effect balance. p.780, p.804.

124: Limiter - Multitap Delay

This effect combines a mono limiter and a multitap
delay. You can change the order of the effect s.
Wet: Mono In - Mono Out / Dry: Stereo In - Stereo Out
Left
Limiter
+
Limiter
Gain Adjust
Right
Envelope - Control
Routing
[Limiter ➝ Mt.Delay, DLY ➝ Limiter]
Routing
Switches the order of the limiter and multitap delay.
LIMITER
Ratio
Sets the signal compression ratio. p.765.
Threshold [dB]
Sets the level above which the compressor is applied.
p.766.
Attack
Sets the attack time. p.766.
Release
Sets the release time. p.766.
Gain Adjust [dB]
Sets the limiter output gain. p.766.

125: Exciter - Comp

This effect combines a mono exciter and a compressor.
You can change the order of the effects.
[+/–100]
[Normal, Wet Invert]
[Dry, 1:99...99:1, Wet]
Routing Wet / Dry
Multitap Delay
Feedback
Delay
(2)
(1)
High Damp
Mt.Dly Wet / Dry
Wet / Dry
[1.0 :1...50.0 :1, Inf :1]
[–40...0]
[1...100]
[1...100]
[–Inf, –38...+24]
Mono-Mono Serial 124: Limiter - Multitap Delay
Source
Selects the phaser's Wet/Dry modulation source.
Amount
Sets the phaser's Wet/Dry modulation amount.
OUTPUT
This is the standard effects output section, with
modulatable control over wet/dry balance. For more
information, see "OUTPUT" on page 764.
MULTITAP DELAY
Tap1 Time [msec]
Sets the Tap1 delay time.
Tap2 Time [msec]
Sets the Tap2 delay time.
Tap1 Level
Sets the Tap1 output level. p.832.
Feedback
Sets the Tap2 feedback amount.
High Damp [%]
Sets the damping amount in the high range. p.829.
Wet/Dry
Sets the multitap delay effect balance.
Source
Selects the multitap delay's Wet/Dry modulation
source.
Amount
Sets the multitap delay's Wet/Dry modulation
amount.
OUTPUT
This is the standard effects output section, with
modulatable control over wet/dry balance. For more
information, see "OUTPUT" on page 764.
Wet: Mono In - Mono Out / Dry: Stereo In - Stereo Out
Left
Exciter
EQ Trim LEQ HEQ
+
Exciter
Right
[Off...Tempo]
[+/–100]
[0.0...1360.0]
[0.0...1360.0]
[0...100]
[+/–100]
[0...100]
[Dry, 1:99...99:1, Wet]
[Off...Tempo]
[+/–100]
Wet / Dry
Routing
Compressor
Comp
Output Level
Wet / Dry
Envelope - Control
865